Thinking about automating your production?
First and foremost, keep us in the loop. If you do not yet have a manual MicroBlasting system, we can help you put one together that easily transitions into an automated system after you prove out the process. Second, consider nozzle fixturing as you build your plans.
Third, read this post!
Our Design Approach
Each automated application fixture is unique and part specific. You’ll see what we mean below. Our consistent goals across designs are:
- Limit the components that come into contact with abrasive.
- Use materials that are hard enough to resist abrasive or soft enough to slough off energy that the abrasive transfers.
- Make sure wear items are easy to replace.
- Limit disturbance on nozzle-to-target alignment.
Consider the Nozzle
The crux of any automated system is the nozzle fixture. Every fixture must hold its nozzle(s) accurately. We highly recommend conducting your MicroBlasting research with AccuFlo®-style nozzles*. We primarily use these nozzles in our automated systems, because they are easier to replace, last longer, and provide more consistent and repeatable results.
*There are exceptions to their use. Some applications require the PowerFlo® and thus, PowerFlo-style nozzles. Another reason to consult with our Sales Team from the outset!
The Benefits of AccuFlo-style Nozzles
Threads Above the Fray
AccuFlo-style nozzle threads are out of harm’s way. This sensitive wear point is blocked from the abrasive stream: a small, but significant factor that extends the life of the nozzle.
Quicknut replacement is easy and, well, quick! The Quicknut need only be finger-tight to lock the abrasive hose onto the back of the nozzle. Click the video to see how easy it is to replace an AccuFlo-style nozzle:
Consistent Alignment from Nozzle to Target
Each part in the nozzle and its fixture introduce a potential impact to repeatability. More parts equate to more adjustment with each nozzle replacement which means more variation in results. MicroBlaster®- style nozzles require an additional nosepiece, a handpiece and an o-ring to fixture. This o-ring compresses and wears over time. Each of these additional pieces needs aligning with every nozzle replacement.
AccuFlo nozzles only have 2 pieces: the Quicknut and the nozzle itself. No nosepiece. No handpiece. No o-ring. The nozzle tip is held at its base by the fixture, keeping the nozzle-to-target distance consistent through replacement.
Why does nozzle distance even matter? Our previous post, How Far Away Should I Hold the Nozzle From the Targeted Part? walks in-depth through this essential question.
Consider the Nozzle Fixturing Possibilities
Our engineers have built an array of blast assemblies for to suit most applications. Here is a quick gallery featuring popular examples of the available nozzle fixtures to help you and your team brainstorm possibilities.
Nozzle Alignment Laser
Take it one step further with the Nozzle Alignment Laser. This component attaches at the back of the nozzle and places a dot on the part’s surface where the abrasive will strike. Once alignment is set, simply remove the Nozzle Alignment Laser and attach the abrasive hose. See video below: